**Contents**show

Rounded up, 9,625 BTUs per gallon are needed to actually be absorbed by the water itself, to take it from 32 f degrees to 220 f degrees steam.

## How many BTU does it take to boil a gallon of water?

One BTU is the amount of heat energy required to raise one pound of water by 1ºF. Water weighs 8.33 pounds per gallon so we can calculate that one gallon of water requires 8.33 BTU to raise the temperature 1ºF.

## How much energy does it take to boil 1 gallon of water?

Water requires the input of 4.2 KJ to raise each kilogram by 1 degree centigrade. A gallon of water weighs 3.79 kilograms. Assuming you’re raising it from 20C to 100C, the energy required is 4.2 KJ * 3.79 kg * 80C = 1273.44 KJ, or roughly one-third of a kilowatt-hour to bring the water to a boil.

## How fast will 15 000 BTU boil water?

On a 15,000 BTU burner, with water starting at 50°F it would take 12-15 minutes for 6 quarts (1.5 gallons) of water to boil. And 20-25 minutes to bring 12 quarts (3 gallons) of waters to a boil.

## How much energy does it take to boil water?

The energy required to change water from a liquid to a solid is 333.7 kJ/kg while the energy required to boil water is 2257 kJ/kg. The amount of energy needed to change the phase of water to a gas from a liquid is 540 times the amount of energy needed to raise the same amount of water 1° C.

## Is 18000 BTU enough for cooking?

Middle: 2,000–10,000 BTUs. Mid-range BTUs are good for everyday cooking like sauteing and frying. High: 12,000–18,000 BTUs. These high BTU burners are meant for high heat cooking like searing and stir-frying.

## How many BTUs should my water heater be?

Input ranges from about 32,000 on a 30-gallon unit to 88,000 on a 100-gallon tank. A common input is 34,000 BTUs on a 40-gallon tank and 36,000 BTUs on a 50-gallon tank. The higher the BTU input and efficiency, the faster the recovery. Electric water heaters typically have one 5,500-watt or two 4,500-watt elements.

## How do I calculate BTU of water?

The Formula

Math is the key to understanding how BTUs move through a system. The simple formula for water is System Delivered BTU = 500 x GPM x System Water Temperature Change.

## How many BTUs does it take to heat 1 pound of water?

The centigrade heat unit (CHU) is the amount of heat required to raise the temperature of one pound of water by one Celsius degree. It is equal to 1.8 BTU or 1,899 joules.

## How many BTU does it take to convert water to ice?

It takes 28 btus to change 1 pound of ice to 1 lb of water. The temperature of ice and water does not change.

## How long should it take to boil water on an electric stove?

So, How long does it take for water to boil? 1 liter of ordinary tap water will boil after 6-8 minutes at a gas stove and from 9 to 12 minutes at the electric stove. If the water is pure, it will be 6 minutes at a gas cooker and 8 minutes at an electric stove.

## How long does it take to boil 2 cups water?

On a stove it would take about 5 minutes to boil 2 cups of water, depending on the stove and the factors I mentioned before. Usually it’s 2 minutes per cup of water. It would take a lot longer to boil water on a grill. In a microwave, it would take about 1.5 to 2 minutes to boil 2 cups of water.

## How long does it take to boil water in the microwave?

What is this? In order to boil a cup of water in the microwave, the required time is approximately 1-3 minutes to reach the boiling point. However, this depends on the microwave wattage or amount of water being heated.

## What is the most economical way to boil water?

For appliances – microwave, electric tea kettle, electric stovetop – the most efficient appliance is the one that can boil water while pulling in the least amount of electricity via its plug.

## Is it cheaper to boil water with gas or electric?

Because gas is cheaper than electricity, it works out slightly cheaper to boil water on a gas hob than using an electric kettle, as long as you are boiling just the quantity you need and switch off the hob as soon as it has boiled.

## How much energy does it take to evaporate a gallon of water?

It takes 8,092 BTUs to evaporate one gallon of water. Natural gas has a heating value of 1,000 BTUs per cubic foot (1 Therm = 100,000 BTUs). Approximate cost of natural gas is $0.50 per Therm.